All Categories ​>​ ​PremiSys ​ > ​ ​Triggers and Procedures

Triggers and Procedures

Masking a Monitor Point When Time Zone Starts

Masking a Monitor Point When Time Zone Starts. To mask a monitor point when a time zone starts: 1. Right-click the Trigger(s) folder in the Globals hardware tree. Select "Add Trigger." The Trigger Wi…

Updated by Marty

Unmasking a Monitor Point When Time Zone Ends

Unmasking a Monitor Point When Time Zone Ends. To Unmask (ARM) a monitor point when the Time Zone ends: 1. Right-click the Trigger(s) folder in the Globals hardware tree. Select "Add Trigger." The Tr…

Updated by Marty

De-energizing a Control Point with Time Zone

De-energizing(turn off) a Control Point with Time Zone. 1. Click the Globals Tab at the top of the Hardware configuration window. 2.Right-click the Trigger(s) folder in the Globals hardware tree. Sel…

Updated by Marty

Setting up a Push Button to Momentarily Unlock a Door

Setting up a push button to open a door.

Updated by John Yang

Pulse a Secondary Relay for a Door Opener.

Pulse a Secondary Relay for a Door Opener. I have a reader connected to the panel and I need to pulse a secondary relay for a door opener. Using this configuration the relay will pulse immediately wh…

Updated by Marty

Energizing a Control Point When a Specific Card is Presented

Energizing a Control Point When a Specific Card is Presented. 1. The first thing you need to do is setup a User Level. Click the Access Settings tab at the top of the Hardware configuration window. 2…

Updated by Marty

How to Setup Double Card Tap to Unlock and Lock a Door.

How to Setup Double Card Tap to Unlock and Lock a Door. 1. We need to set the door for Double Card. Login to PremiSys - Click Tasks - Hardware Configuration. 2. Go to Doors folder under the controlle…

Updated by Marty

Energizing a Control Point Using a Time Zone

Energizing a Control Point Using a Time Zone. 1. Click the Globals Tab at the top of the Hardware configuration window. 2. Right-click the Trigger(s) folder in the Globals hardware tree. Select "Add…

Updated by Marty

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)