LP1502 Series 3- Two Reader Controller Support

LP 1502 Series 3 -Two Reader Controller Support -   PREM-CTLR2RDR-LP

No power at the reader port. The jumper must be set to pass through if you are powering the panel with less then 15.5 volts Please click here for more information.

*** Please Note if you are using this or any other Series 3 Controller, PremiSys 3.2.121 or older version you will turn on DIP Switch 4. You will select the EP1502 within PremiSys when adding the controller. ***

Turning ON Dip switch 4 makes the LP1502 report and function like the EP1502.

Support for the Series 3 controllers will be released in Premisys Version 4.

LP1502 Series 3 Install Manual - Click for Download

LP1502 Series 3 Cut Sheet - Click for Download

LP1502 Series 3 Closeup Image - Click to Open

Identicard Part Number: PREM-CTLR2RDR-LP

*** Please Note if you are using this or any other Series 3 Controller, PremiSys 3.2.121 or older version you will turn on DIP Switch 4. You will select the EP1502 within PremiSys when adding the controller. ***

Turning ON Dip switch 4 makes the LP1502 report and function like the EP1502.

Support for the Series 3 controllers will be released in Premisys Version 4.


How did we do?


Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)