Programming Mercury Controllers
Set static IP on computer to 192.168.0.252, subnet 255.255.255.0. No gateway if connected directly to controller. Turn on DIP Switch 2 on the controller. Power controller on. Log in with 192.168.0.251. Turn on DIP Switch 1 to log in with default username = admin and password = password.
Change Connection Type to IP Server. On Host Comm tab Change port to 6005. At the bottom of the page click Accept.
Enter the necessary information on the Network tab for IP, Subnet, and Gateway and DNS Server info. At the bottom of that page click Accept.
On the Apply Settings tab click Apply and Reboot.
